Self-Installation Kits
We provide the
Installation Documents
all Equipment
Unlimited Telephone
Support
Five Year Warranty Patrick
McAllister
303.670.1099 ext 11
AVLELEC's "Do-it-yourself" kit includes
everything needed for a simple installation and will effectively mask 900 to
1,000 square feet (expandable to 11k ft and beyond)
The self installation kit includes the
following:
(scroll down to add more speakers or additional zone amplifiers for Paging, or
Soundmasking Music)
Four (4) AVL Soundmasking
Speakers Our Premier Soundmasking & Music Speaker
Assembly. 8" Dual Cone, 10oz Speaker Magnet, .25, .5, 1, 2 and 4 Watt
Transformer Tap. 734 Cubic Inch Enclosure (for greater bass response). Mount
Upward, Downward, Horizontal. Great for Soundmasking, Soundmasking Music,
Clear Paging, Emergency Evacuation Life Safety Digital Recordings.
Shipped complete with installation drawings, required cable, wire nuts and
speaker mounting hardware.
Add Soundmasking, Paging, Soundmasking Music Zones
Simple clean power
60 Watt single input power amp
1 Balanced or Unbalanced input
1 Unbalanced line output
Loudness contour switch (+4dBu @ 100Hz and 10kHz)
Soundmasking / Paging Amplifier
SMAP-A601
60 Watt Single Channel Power Amplifier
The PA601 is the perfect choice for distributed soundmasking
background music (BGM) systems when the requirement is simple
amplification without MOH or advanced mix functionality.
Model SMAP-A601, $ 322.75 Qty:
2 Stereo line inputs
Pre Out/ Power in patch
Remote and VOX activated Mute
Route any source combination or entire mix bus to Zone 2 (MOH Out)
Special Low Cut filter is 6dBu / octave at 400Hz and also bypasses
front panel bass control to allow use with paging systems Dual line
outputs
35 Watts of true output power for less money than most competitors
15 Watt models
1 Mic in w/phantom power
Soundmasking Amp SMA-35
35 Watt Three Input Mixer Amplifier
Ch.1 - Soundmasking Signal Input
Ch.2 - Telephone Paging Input
Ch.3 - Soundmasking Music Input (or Fire Alarm Chirp)
The AVL-SMA-35 is a 3 input channel mixer amplifier designed for
distributed business paging, background music (BGM) and sound
masking systems, small to medium speech privacy systems and in
applications where music on hold (MOH) plus paging is required. Model SMA-35, $ 249.75 Qty:
Zone 2 MOH out from CH6 line source
120 Watt 6 channel mixer amplifier
5 Mic/Line inputs with phantom power and 1 stereo summing AUX input
Remote or VOX mute capabilities
Special Low Cut filter is 6dBu/octave at 400Hz and also bypasses
front panel bass control to allow use with paging systems
Bridge in/out circuit with balanced link / internal relay to engage
circuit is perfect for small room combining systems eliminating the
need for external electronics
Pre out / power amp in for patching external processors
Soundmasking Amp SMA-120
120 Watt Six Input Mixer Amplifier
Literature
Sheet
Installation
Manual
AVL-SMA-120 amplifier is a powerful 120 Watt amplifier engineered
with unique features to assist the contractor or installer in
today’s commercial business audio environment. This 6 input unit
features extensive muting and output options along with a very
unique bridge in/out feature to allow combining of multiple
amplifiers in zoned sound masking applications without the need for
external relays. VCA control is included which may be assigned to
the BGM input or globally for the entire amplifier.
Model SMA-120, $ 589.75 Qty:
Remote or VOX mute capabilities
Special Low Cut filter is 6dBu/octave at 400Hz and also bypasses
front panel bass control to allow use with paging systems
VCA control assignable to input 6 line level (BGM) input or global
for the mix bus
Bridge in/out circuit with balanced link / internal relay to engage
circuit is perfect for small room combining systems eliminating the
need for external electronics
Pre out / power amp in for patching external processors
Zone 2 MOH out from CH6 line source
240 Watt 6 channel mixer amplifier
5 Mic/Line inputs with phantom power and 1 stereo summing AUX input
Soundmasking Amp SMA-240
240 Watt Six Input Mixer Amplifier
AVL-SMA-240 amplifier is a powerful 240 Watt amplifier engineered
with unique features to assist the contractor or installer in
today’s commercial business audio environment. This 6 input unit
features extensive muting and output options along with a very
unique bridge in/out feature to allow combining of multiple
amplifiers in ballroom applications without the need for external
relays. VCA control is included which may be assigned to the BGM
input or globally for the entire amplifier
Model SMA-240, $ 759.75:
Two Zone Power Amplifier Model
ZP-700
HIGH-PERFORMANCE, DUAL-CHANNEL, COMMERCIAL AUDIO AMPLIFIER
A professional grade audio power amplifier specifically designed for
demanding contractor applications, the ZP-700 features esoteric
grade toroidal power supply and output transformers. These
transformers were chosen for their outstanding reliability as well
as extended frequency response (-3dB @ 30Hz - 70.7V output through
transformer) Now you can have the peace of mind that systems
specified with the ZP-700 will have true transformer output
isolation, a feature that previously may have not been affordable
due to the cost of quality external transformers.
ZP-700’s two independent channels ensure maximum channel separation
and ultra low distortion figures while providing years of faithful
service.
Model ZP-700, $ 879.75:
Value Added Service
(we provide the following at no additional cost)
* AutoCAD Device Location Drawings (you provide the background) *
* AutoCAD Point-to-Point Wiring Schematic *
* All Speaker Cable, Plenum Rate *
* Unlimited Telephone Support, Including 3 Engineers Home and Cell Phone
No's *
On-Line Since 1997
Client List includes: Northrop Grumman, Alcoa Aluminum, R.R. Donnelley, 7
Federal Penitentiaries, Several Military Bases, Honeywell, ADM Corn
Processing, Bureau of Land Management, Johnson & Johnson, U.S. Dept. of
State (to name a few)
Call Patrick McAllister 303 670 1099 ext 11
Soundmasking, Speech Privacy, Turnstiles with Card Access (EntraPASS Global
Edition)
Since May, 1989
