New AVLELEC Products

Seismic Certified Racks & Cabinets

Better than seismic rated . . . avlelec's UL Listed racks are now approved for use in low/moderate/high seismic zones as specified by the International Building Code (IBC), Uniform Building Code (UBC) and the California Building Code (CBC) in zones 1, 2, 3, 4A, 4B, 4C. Seismic certified racks and cabinets feature extra weldments to the base, reinforcing brackets and complete certification documents with installation details for trouble-free anchoring per IBC, UBC, and CBC. Approved models include all of avlelec's vertical floor cabinets and ganging rack Series L260, L262, L265, L267, L268, L275, L277, L278, L279 with -S suffix for seismic version.

Click here for individual product spec sheets

15W UNIHORN with trim ring & grille

avlelec's LUH-15T UNIHORN^TM is engineered with the precision of a Swiss-army knife offering a complete array of features and versatility in its compact 3.361"D size. The15W universal-use horn has multiple patents pending with its self-contained aluminum housing, contoured aluminum trim ring and press-fit aluminum grille that projects a mere 0.767" with no visible hardware. The unique re-entrant horn is engineered to provide labor-saving installation in brick, concrete block, plaster and drywall while achieving clear intelligibility, durable performance and architectural integrity. The UNIHORN^TM mounts indoors or out, using adjustable clamps or screws; it installs with or without a 4"D backbox (order separately) in recessed or surface applications, and provides a finished appearance using the factory mounted trim ring and fine perforated grille included. Additionally, the UNIHORN^TM will accept a standard 8" speaker grille and backbox if desired (see accessories). Simple 2-wire hook up, dual capacitor circuitry, and reliable weather resistant performance make this 15W, 105dB horn ideal for standard or supervised paging and signaling applications.

UNIHORN^TM construction is aluminum with stainless steel hardware and a gasketed moisture-seal rear cover. Connections are made to a rear metal clamp and the 25/70V transformer is screwdriver adjustable on the front of the unit. The horn with aluminum trim ring and grille weigh 3.7 lbs. Assembly finish is Network gray powder epoxy.

Click here for specification sheet

Click here for install sheet

---

Sequentially controlled AC
loadcenter system

avlelec's ACLC Series sequenced AC loadcenter systems provide one switch remote control of circuit breakers for time sequenced AC power distribution to sound system components. UL Listed ACLC Series is engineered to provide easy ordering and simple installation. Package systems include Model ACSC-248 sequencer bundled with two remote switches and a Cutler Hammer loadcenter (choose 1-phase 100A or 200A; or 3-phase 125A or 225A main breaker). AVLELEC also offers individual 20A and 30A breakers (single or dual) with plug-in control cable. Breaker control cable simply plugs in to the sequencer to set and change sequence operation - no wires to strip. Sequence delay is easily set from 0.5 to 10 seconds using a flat blade screwdriver. To configure a loadcenter with more than one sequencer or to retrofit an existing Cutler Hammer or compatible loadcenter, sequencer Model ACSC-248 may be ordered separately.

Click here for New Product Supplement Spring 2004 (966K PDF)
Click here for installation sheet

iMount^TM features upgraded hardware

IMount^TM Series performance speaker systems for flying or bolting to Unistrut® offer consultants and integrators over 130 ready-to install-systems with a variety of performance and aesthetic options. The complete series has been upgraded to include forged 1/4" - 20 eyebolts for demanding flown installations and a flush 4" x4"overplate for easy yet unobtrusive access to wire connections. Selected models are now being UL Listed (contact factory for ship date and model offering). avlelec's iMount^TM series features a choice of five drivers (12P150, 10P125, 8P100, 8A50, and 8S100) wired in a choice of three rectangular (3, 2, 1 cu.ft.) or three cylindrical (2, 1.25, 0.75 cu.ft) enclosures lined with 1-1/2" thick acoustic batting. Options include choice of transformer and grille. See catalog pp 34-37.

Click here for New Product Supplement Spring 2004 (966K PDF)

Click here to locate individual product specs

---

iMount^TM Q-Series premium performance

avlelec's 3cu.ft. rectangular iMount^TM Q-Series packages are now available with a new 200-watt 'consultant's choice' 12-inch driver. Quality systems have been designed for high performance and high power handling. The premium 12Q200 driver features a 4-inch voice coil, cast aluminum basket, premium crossover engineering, and massive magnet structures on the woofer and compression tweeter: Model numbers with system specifications are shown below. A cylindrical 2 cu.ft. version (IMC12Q Series) will also be available shortly with the same selection of transformers. Please allow 4-8 weeks lead time as these premium performance systems are built-to-order.

---

SB Series Coaxial Ceiling Assemblies

DS Series Dual Cone Wall / Surface Assemblies

LT Series Tile Speakers in 2' x 2' value models

By popular request, AVLELEC now offers two new 2' x 2' assemblies that are value priced using dual cone driver models 810 (15W) and 805 (12W). Ready to install systems include a dual voltage transformer with terminations exiting through a metal clamp on the 8XD4 protective backbox.

---

Keylock Volume Controls on a 1-gang plate

KL100 Series patented keylock volume controls are now a compact 1-gang size (formerly 2-gang) with power handling to 100 watts. Keylock secured devices are ideal for applications where the ability to make volume adjustments is limited to authorized individuals. Controls are offered with a Decora-style two-piece wall plate for versatile application in single or multi-gang installations. Choose white, ivory, black, or stainless steel plate. Stainless models have a black or white subplate and will be available in a 1-piece plate version by 4th quarter. All feature 3dB per step attenuation and phoenix-style removable screw termination for pre-wire with capacity for 14ga wire. Models with priority relay (24 VDC @5mA) allow emergency and paging signals to bypass (override) the attenuator. Mounting depth is a mere 1.75 inches to fit into standard electrical boxes.

---

Model L29K is a reinforced keyboard shelf engineered to mount an extended keyboard and support a full-size computer monitor. Heavy-duty assembly features a slide out shelf with a rotating tray to accept a standard (18"W) keyboard. Simply mount the keyboard to the tray and swivel into user or storage position. When the drawer is closed, a snap-close panel secures the drawer. A standard keylock is also available; suffix -L. Each keyboard drawer also includes a full-length wrist pad and a mouse pad extension that slides for right- or left-hand use. 19"W x 20"D drawer with 16" extension mounts on front and rear rails and is reinforced on the top for heavy equipment support. Panel height is slightly larger than 2RU (4.34"H) yet shouldn't pose a space problem as the top shelf is designed to support monitors of varying heights. Finish is black powder epoxy.

Contact AVLELEC when you need a shelf with custom face panel to mount and secure non-rackmount electronics. Shelf/panel assemblies are made to your specifications. for a professional and aesthetically consistent method of mounting electronic components. Specify satin or textured black powder epoxy finish.

ACS Series power strips are 15A relocatable devices that provide convenient access to power in racks and cabinets. Easy to install AC power strips feature a mounting clip with single screw and terminate to a cord with molded plug (see lengths below). ACS Series is UL Listed and features single receptacles with spacing conducive to plugging in large power supplies. For secure operation of larger/heavier supplies in a vertical rack orientation, a bag of cable ties is provided for installation convenience. Each receptacle is white for easy visibility inside a dark cabinet. Model ACS-1506 has six receptacles and measures 20"L, ACS-1512 has twelve and is 32"L, ACS-1524 has 24 receptacles and is 60"L. All three sizes include transient voltage surge suppression (UL 1449-2 Listed) with an LED indicator and a 15 Amp circuit breaker.

avlelec's new tilt-out wall cabinet Series L87 is ideal for surface or recessed wall installation of rackmount and non-rackmount electronics in schools, training facilities, retail stores, and anywhere a 3RU tilt-out wall cabinet with locking security is desired. Series includes surface mount (L87-5SE) and semi-recessed (L87-5RE) versions with vertical equipment loading so that controls face up achieving minimal projection from the wall surface. Feature rich design offers adjustable seven-position mounting rails plus two adjustable height hold-down brackets for securing non-rackmount gear such as consumer DVD players or VCR's. Each model also includes two internal and three external (frame mounted) cut-outs with blank cover plates for installing low voltage Decora®-style devices such as on/off indicator lights, switches, microphone connectors, phono jacks, or volume controls. Models also include ventilation slots for air circulation, knockouts, adequate space for internal installation of an E.O. Box, and two safety latches for solid support when opened to the 90-degree service position. Finish is avlelec's durable powder epoxy in neutral network (computer) gray.

Expanded selection of rackmount device panels presents a clean and organized solution for custom mounting devices in minimal rack space. All feature a steel panel finished in black with control cutouts, hardware, a rear lacing flange for wire management, and a mounted black polycarbonate overlay with clear top pocket for label strip identification of controls. All controls are ordered separately. Visit the AVLELEC website for a label making template for each panel (MSWord® format).

avlelec's rolling slope-front rack Model L45-21 is an under-counter rackmount solution with mobile convenience and slope-front viewing comfort. Rack features side handles, casters, a unique "stow-away" door, and two cutouts with blank cover plates for external mounting of optional accessory switches or controls. Height is 26.875" (including casters) to fit easily under desktop height surfaces and counters.

Ergonomic design features 12RU of mounting space on a 15 degree slope for comfortable viewing of equipment while seated. The locking front door opens out from the top and may be slid into the base for out-of-sight storage or simply lifted off. Stowing/lift-off door design resolves the common problem of open doors blocking equipment in neighboring racks. The rear door is recessed with lock, traditional right hinging, and a 2"H lower opening for wire access.

Rack also features two Decora®-style cutouts with cover plates above the locking front door for optional mounting of low voltage accessory switches or controls. External location of switch devices such as system status indicators, on/off power switches, microphone connectors, phono jacks or volume controls allow the rack to remain locked and secured. Construction is 16-gauge steel finished in avlelec's durable black powder epoxy.

Click here for New Product Supplement Spring 2004 (966K PDF)

AVLELEC introduces an architecturally appealing door system to solve the growing need for separating and securing equipment within a rack or cabinet. Attractive "boardroom quality" solution for dual-access security features a beveled edge frame (L46 Series) that face mounts similar to a standard door and includes threaded inserts for attaching up to two doors with left or right hinging. The dual door system does not take up any panel mounting space or disturb previously installed equipment. It is easily field mounted without drilling or may be factory installed when ordered with the cabinet.

The versatile system can be utilized on all AVLELEC ganging racks, floor and sectional wall cabinets. The steel frame is 1"D with vents to match the cabinet. Each frame accepts a combination of standard doors (1"D) with choice of steel, Plexiglas (-P) or perforated steel (-PF) styling. For security, top and bottom doors are keyed differently.

AVLELEC Models SCS-4R and SCS-8R are rackmount sequencers that provide time-delayed activation and de-activation of equipment that is connected to AVLELEC Remote Power Controls. Model SCS-4R provides four control outputs and SCR-8R provides eight outputs. Each output can activate equipment connected to a maximum of ten Remote Power Controls (Series RPC - order separately). Additionally, each output also includes a separate auxiliary relay contact for sequenced operation of other devices.

Sequencers feature a 1RU chassis, variable time delay, LED status indicators, UL Listed power supply, and rocker or keyswitch activation. Optional switch(es) may also be used to activate the sequencer from remote location(s). (order Decora®-style wall switch Model RPSW-M separately.)

Model SMGA-5 is a masking generator with 5W amplifier. Compact 1RU device is ideal for small stand-alone masking or masking with paging installations. It may also be used to add masking capability to an existing paging system or zoned area.

The generator produces the pink noise signal for sound masking. The built-in amplifier (5W into 70V, 25V, or 8ohm) may be used for paging, music, or signaling sources. System controls include output level and an adjustable low pass filter, level adjustment for the auxiliary input signal, noise level, master level and individual tone controls for shaping bass, midrange, and treble frequencies.

New IMount^TM Series Suspended Speakers

IMount Suspended Speaker Systems from AVLELEC are engineered for high intelligibility, musical quality, and labor saving in high ceiling venues. Factory-wired systems include one of avlelec's new pro-level coaxially mounted compression drivers (12 inch-250W or 150W, 10 inch-125W, 8 inch-100W), or a direct radiator coaxial driver (8 inch-50W), or subwoofer driver (8 inch-100W) with a choice of high performance transformer (100W, 32W, or 16W) direct-mounted into a large volume cylindrical or rectangular enclosure (.75 to 3cu.ft) with architectural grille, eyebolts for suspended installation, and easy-access E.O. Box for fast speaker line termination. The new IMount family of high performance speaker systems provides consultants and systems integrators with mix and match component versatility in an easy to order and easy to install package that satisfies performance requirements for venues with open or mixed height ceiling applications.

Click here to locate individual product specs

---

LT Series lay-in tile speaker systems are engineered to provide fast and unobtrusive installation of high-quality paging and music speakers in suspended tile ceilings. Ready-to-install 1' x 2' systems require no speaker cut-outs in the tile or time consuming assembly. They simply replace half of a 2' x 2' tile or one quarter of a 2' x 4' tile and are supported by the T-bar grid.

Selection includes choice of factory wired speaker/transformer assemblies mounted to a 1' x 2' sub-plate with fine-perforated grille, built-in T-bar cross support, and optional factory installed backbox. Built-in T-bar cross support is a AVLELEC exclusive that saves installation time by eliminating the need to field cut or mount an extra ceiling grid frame member. Each assembly mounts as easily as a ceiling tile into the grid system and includes provisions for tie-in to the building structure where required. Models with factory installed backbox feature externally accessible speaker leads that exit through a strain relief for dependable and fast connection.

---

New Flat-ship shelf

Click here to download spec sheet

---

UL Listing on

39 new racks and cabinets

www.AVLELEC.com is pleased to announce that its new series of racks and cabinets, engineered in 2000 for superior strength and wire management capabilities, is now UL Listed under Standard 1678. The UL Listing encompasses 39 models and offers contractors expanded application versatility for meeting project or local building code requirements.

AVLELEC ganging rack frames are engineered to provide maximum efficiencies in mounting, wiring, and cooling of rack mounted equipment. Series L278, L277, and L275 racks are manufactured to E.I.A. standards, are 19" wide by 32", 27", or 22" deep respectively and offered in 61", 70" or 77" panel space heights. All feature the strength of 16-gauge CRS seamless side frame construction with a 14-gauge CRS bottom and reinforcement at all load-bearing junctures to provide the equivalent strength of 11-gauge steel. Top features compound knockouts and a 10RU or 3RU E.I.A. opening with complimentary solid closure panels. Racks also include a vented rear door, mounting hardware, and field friendly wire management and installation features (see spec sheet for details).

Redesigned, easy-order clock baffles

Click here for New Catalog Page

Series L53 and L50 sectional wall cabinets from AVLELEC give installers carefully
engineered solutions to age-old problems. This UL Listed sectional design (UL Standard 1678) provides swing-open access and locking security for equipment installations where wall mounting is desired or floor space is unavailable.